?

metal dome,membrane keypad

membrane switch label
Material	Polyester or Polycarbonate
Artwork Format	CorelDraw, Adobe Illustrator AI or EPS, AutoCAD Dwg or DXF
Tactile Feel	Is determined by the thickness of the overlayer. Normally between 0.06” -0.08".
Color Verification	Pantone Matching System;The Munsell Color System;Color Samples
Conductive Trace	Silver or Copper
Shielding	EMI/ESD/RFI can be employed.
Dome	Stainless Steel or Mylar
Actuation Force	Depend on customer's requirement. Normally between 30-600 grams.
Travel	Depend on customer's requirement. Normally between 0.010" - 0.020".
Life Cycle	5 Million Cycles(up to)

?

Strength:

1, Pressing life-span is over ten hundred thousand times.

2, have the characteristics of the function stabilizes.

3, handle reliably and good tactility feeling.

4, customised design

Technology

Operating voltage:? 35V DC
Operating current: 100mA? 1W
Contact resistance: < 100 Ohms
Open circuit resistance: ≥ 10MΩ at 100V

Operating temperature:?Flat/Metal dome:-20°c to +80°c

Storage temperature: Flat/Metal dome:-40°cto +80°c

Life expectancy? Flat type≥5,000,000 times Tactile type≥1,000,000 times

Switch stroke: 0.1 to 0.6mm
Contact bounce: 5 to 30ms
Actuation force tolerance: +/- 20 to 45g
Tactile ratio: FC > 40%
Operating humidity: up to 95% RH
Female, male connector, solder pins and heat seal connectors are available

Packaging & Delivery

Packaging: ?PE bag, Carton, Wooden case

Delivery Detail: two weeks after order confirmation

?