Remarks for Sweet Corn Maize Cutter Picker :Non-tightening over the limits which leads to distortion or broken gearbox input shaft. Adjusting tension of a single variable speed belt. Make the variable speed drive wheel in the center position, the variable cylinder piston rod conditioning nut twist or twist out(Twist the adjustment HK2840 belt, relaxation HK3315 belt; Vice instead), but the adjustment is not greater than the amount 15mm. After adjustment in a single belt, should be" Adjusting tension of variable speed belt " to re-adjust the adjustment frame welding, So that the two belts have the same degree of tension. Attention in the application. 1.The variable speed wheels when installation, we need to adjust the pulley and walking pulley intermediate shaft output,the transmission surface between the transmission input pulley of gear,  to ensure that the two drive pulley

groove symmetry plane loop position is no more than 2mm. 2. Variable speed control lever should be done slowly. Forbidden to mention fierce relentless pressure. 3. The the variable speed wheel must be well marked before demolition. When installation, assembled against marks, non-transfer position, otherwise the pulley will affect the balance, causing large vibration.

Our company

Our factory with more than 23 years of experience and innovation, such as Hydraulic Pressure Disc Harrows, Small-box Rotary Tiller as well as Crawler type rice combine harvester and so on, offers one of the most complete lines in the industry.