low cost high efficiency Multi-function Battery Charger
low cost high efficiency Multi-function Battery Charger
low cost high efficiency Multi-function Battery Charger
low cost high efficiency Multi-function Battery Charger
low cost high efficiency Multi-function Battery Charger
low cost high efficiency Multi-function Battery Charger

1 / 6

low cost high efficiency Multi-function Battery Charger

Get Latest Price

Basic Info

Model No. 12V5A
Brand Name PROSTAR

Product description

low cost high efficiency Multi-function Battery Charger
? Microprocessor Control (CPU);
? 7-STAGE AUTOMATIC CHARGING;
? This is a fully automatic battery charger with 7 charge stages;
? Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely;
? 7-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers;
? 7-stage chargers are suitable for most battery types including Calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries;
? Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM.

Model

input voltage(AC) output voltage(DC) output current protection
VCA-1205 220-240V,50Hz110V,60Hz 12VDC 5000mA

1. polarity reverse circuit protection;

2. short circuit protection;

3. over voltage protection;

4. thermal protection;

5. cooling fan;

VCA-1207 220-240V,50Hz 110V,60Hz 12VDC 7000mA
VCA-1210 220-240V,50Hz 110V,60Hz 12VDC 10,000mA
VCA-1212 220-240V,50Hz 110V,60Hz 12VDC 12,000mA
VCA-1215 220-240V,50Hz110V,60Hz 12VDC 15,000mA
VCA-1220 220-240V,50Hz 110V,60Hz 12VDC 20,000mA
VCA-2405 220-240V,50Hz 110V,60Hz 24VDC 5000mA
VCA-2410 220-240V,50Hz 110V,60Hz 24VDC 10,000mA
?
1.Desuiphation: Reducesbatterysulphation
2.SoftStart: Preliminarycharge
3. BulkCharge: Rapidcharge
4. Absorption: Finishingcharge
5.BatteryTest: Analysesbatterylevel
6.Recondition:

Restoresbatteryhealthdeeplydischargedbatteries

byequalisingthecells.

7.Float: Maintainreadyforuse.
? This is a fully automatic battery charger with 7 charge stages. ? Automatic charging protects your battery from being overcharged. so you can leave the charger connected to the battery indifinitely .7-stage charging is a very comrehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional charges. ? ? ? 7-stage charges are suitable for most battery types including calcium, Gel and AGM batteries, they may also help restore drained and sulphated batteries. ? ? ? 1. Desulphation ? The desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time,returning then back to full charge,sulphation occurs when lead-sulphate heandes and? clogs up the battery cells . ? ? ? 2. Soft start ? Aprelininary charge processes that gently introduces power to the battery , this protects the battery and increases battery life. ? ? ? 3. Bulk(Constand Current) ? Bulk mode charges the battery at the maximum rate putting a large amount of power into the battery in a short amount of time , this stage will charge the battery to approximately 80%, until the voltage reaches 14.4voltage for 12V charge or 28.8 voltages for 24V charger. ? ? ? 4. Absorption(Constant Voltage) ? The charge rate slows down so the battery can absorb more power and reach 100% charge. the voltage remains at a constant 14.4Voltage for 12V charger or 28.8Voltage for 24V charge while the current is gradually reduced until no more power can be added without over-charging battery . ? ? ? 5. Battery Test ? An automatic battery test is conducted immediately after the absorption stage . the test monitors the voltage for 90 seconds to determine if the charge was successful. ? ? ? 6. Recondition ? ? ? The battery reconditioning function is initiated automatically in the case that the battery fails the battery test (Stage 5), Failing the battery test indicate that the absorption stage was unable to fully charge the battery . the reconditon model will then begin to introduce a low constant current for a period of 4hours. then the charger will go into float charging model. this recondition stage can recover batteries from a deeply discharged state increasing performance and battery life . ? ? ? 7. Float ? The fload stage maintains the battery at 100% charge without overcharge or damaging the battery . this means the charger can be left connected to the battery indefinitely . ? ?




Company Information ?

FAQ ?
Beijing Prostar International Electric Co., Ltd.
  • 11yrs
Beijing, Beijing, China
Visit The Store

low cost high efficiency Multi-function Battery Charger

Get Latest Price

Send your inquiry to this supplier

-
Send Inquiry
Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版權所有 ? 寧波全貿信息技術有限公司 浙ICP備12012821號-1 浙B2-20200628