


1 / 3
Basic Info
| Model No. | SDPC3024 |
|---|---|
| Brand Name | remote power |
Product description
Type | SDPC1024 | SDPC3024 | SDPC4048 | SDPC6048 |
Rated?charge?current? | 10A | 30A | 40A | ? ? 60A? |
Rated?load?current | 10A | 30A? | 40A | ? ? 60A |
Work?voltage | 12v;?12/24V?Auto | |||
Over?load,?short?circuit?protection | 1.25?rated?load?current?60sec,?1.5?rated?loads?current?5sec,?over?load?protection?action.?≥3?Rated?load?current?short?circuit?protection?action. | |||
No?load?current | ≤6mA | |||
Charging?circuit?voltage?drop | ≤0.26?V | |||
Load?circuit?voltage?drop | ≤0.15?V | |||
Over?voltage?protection | 17V;?×2/24V | |||
Work?temperature | Industry?stage:-35℃?to?+55℃; | |||
Boost?charge?voltage | 14.6V;×2/24V;?(keep?10min) | |||
Direct?charge?voltage | 14.4V;?×2/24V;?(keep?10min) | |||
Float?charge?voltage | 13.6V;?×2/24V; | |||
charge?return?voltage | 13.2v;×2/24V; | |||
Temperature?compensation | -5mv/℃/cell?(Boost?charge,?Direct?charge,?Float?charge,?charge?return?voltage); | |||
Lower?voltage?indicate | 12.0V;?×2/24V; | |||
Over?discharge?voltage | 11.1V(no?load)-?real-time?modified?voltage?by?the?discharge?rate;?×2/24V; | |||
Over?discharge?return?voltage | 12.6V;?×2/24V | |||
Control?mode | PWM?charge?mode;?modified?discharge?voltage?by?the?discharge?rate | |||
Charging mode: Pulse Width Modulated control, allows for high efficiency boost, recovery and float charging. Temperature compensation ensures that these parameters are adjusted for maximum battery condition and hence, prolonged battery life. ?
High accuracy discharging control: Over-discharging control voltage modified by the battery discharging rate curve. ? Circuit protection: protection against overload, short circuit and reverse connection, Built in Transient Voltage Suppression protects against lightning. Reverse current leakage through PV panel is blocked. Batteries are prevented from over-charging or discharging. ? LED indication on system condition: Indicating ?LED’s, ?monitor ?battery ?charging ?levels ?as ?well ?as ?battery ?state. ?LED ?monitoring ?of ?load conditions such as over load and short circuit as well as load on/off, are also provided. ? Design standard: Operating temperature range from -35 to +50 deg C. ? No adjustable hardware: Controller ?accuracy,? stability ?and? reliability ?is ?assured? by ?the? use? of? flash? memory ?for ?all ?control parameters and set-points. ? Operation: easy to operate, robust in design. ?
Output Modes: Constant Load (manual switched)….Normal. PWM charge mode & State of charge (SOC) ?Micro Controller Unit utilizing dedicated software for precise control. Tempertature compesation Fully automatic opertation & electric protections Big terminals,easy to connect wire

Company Information Beijing Remote Power Renewable Energy Science Technology Developing Co., Ltd, is a world-leading manufacturer of solar products,we are committed to develop,design, produce, and sell high quality and performance solar power products under the brand "RemotePower"(REPOWER) to a wide range of world markets, including oceania,Southeast Asia,Middle east,Africa,Europe, Russia and South America.?
Note: For 12V solar system: Rated voltage: 12V, solar panel rated work voltage: 17V, Max. power: 340W; For 24V solar system: Rated voltage: 24V, solar panel rated work voltage: 34 V, Max. power: 680W; ?
? ?The?product?warranty?period?is?two?years?since?factory. During?the?warranty?period,?any?problem?caused?by?normal?use?under?the?user?manual?(determined?by?the?controller?factory),?reparation?is?free?of?charge. ?During?the?warranty?period,?if?one?of?the?following?terms?occurs,?repair??will?not?be?free: Not?able?to?provide?the?PI,Receipt,or?other?valid?proof?of?purchase. ?Users’?own?errors?and?improper?installation?,operation?caused?the?faults?or?damage. ?Damage?caused?by?the?fall?on?delivery,drop,or?other?unavoidable?external?factors?cause?faults?and?damage. Improper?use?of?the?damage?caused?by?the?device?water?or?other?corrosive?liquid?. Send your inquiry to this supplier
You may also be interested in
Product Categories