300 Plus Paste Compound offers rapid removal of minor surface defects and swirl marks from all modern paint systems. Super on darker colors, which is recommended for use on OEM and re-finish paint systems. This versatile product can be used by hand or machine

Physical state	paste
Color	cream
Physical form	Emulsion
Odor	Slight Solvent
Density	1.45 g/ml

1. Clean surface thoroughly prior to polishing.
2. Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).
3. Use the Cutting Foam Pad in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine.
5. If working on very dry coatings, soak the pad, and spin off excess water, to prevent dust formation.
6. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
7. Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.
8. Any signs of sanding and use have now been removed. For an exceptionally glossy finish and protection, apply 908 Ultra Seal.

?

?