VAG COM Interface V812.4

CAUTION!

IF THE CABLE CANNOT WORK PROPERLY, PLEASE CHANGE YOUR COMPUTER'S TIME TO 2009.01!

Features
Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions

• Full support for control modules using the new "Service 22" identification methods.
• Support for control modules using the new UDS/ODX/ASAM protocol.  
  The following functions are supported:
  Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.
• New Session Log capabilities.
• Support for Generic OBD-II Mode 10.
• Support for vehicles with dual ECUs, or example the RS4 and W12 engines. 
  Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
• Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
• Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
• New internal Gateway Coding Assistant (required for Audi B8 platform cars).
• Much improved documentation (Label Files) for many older cars

1. Module Version - identify the control module part number and coding version
2. DTC Memory - read and clear manufacturer diagnostic trouble codes
   Actual Values - access live data
3. Activation - sel ected components can be activated
4. Code Module - code new control modules (most models through 2002)
   Adaptation - read/reset Service Light parameters, view/change block learn values
5. Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer)
6. Individual Values - read individual measuring values
7. Readiness Code - Check status of applicable emissions related systems
   Remote Control Programming - program Radio Frequency keys
8. Key Matching - match keys to Immobilizer control module (5 digit)

Workable Models

All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.

What can this interface be used for?
This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Specifications
OBDII Plug: J1962 16-Pin Male (to Car)
Connection Port: USB port
Length: 1.8 meters
Weight: About 150g
Color: Black
Powered from car battery over OBD2 connector

Skype:   cindy52136