Automatic Panel wrapping machines can be designed according to customer product specification and floor plan

1 Fully auto rotary arm stretch wrapper                       1set

1.1 Technology data:

Max load size(mm)	1200mm× 1200mm × 1000mm
Conveyor height	TBD
Packing efficiency	10-60 loads / hour
Rotary arm speed	0-25rpm
Power supply	About 3 KW  380V 60HZ 3Phase
Max load capacity	2000kgs
Wrapping requirement	Bottom wrapping start from 100mm
Working ambiance	Indoor, normal temperature

 

1.2 Wrapping material:

Stretch wrapping film:           Core size: 3’’

Film width:                    500mm

Diameter:                     max 240mm

Thickness:                     14－35μm

One roll of stretch film to be supplied along with machine for trial running

1.3 Utility:

Compressed air

Pressure:            0.5-0.7 MPa

Dew point:          +2-+10℃  (7bar, +2-+10℃)

Filter:              40 μm

Air quality:         oil and water free air  

Air consumption:    1000ml/min

Power supply:       380V (+/- 10%)/3phase/60Hz (+/- 1Hz)

Power installed:      ≈3kw

1.4 Supply scope

1.4.1 Machine main frame                                          1set

Frame size: (to be confirmed by drawing)

1.4.2 Driving device for rotary arm                           1set

Rotary arm speed: n=25rpm (frequency motor with brake)

1.4.3 Film carriage                                                      1set

Pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)

1.4.4 Film carriage delivery device                            1set

1.4.5 Film auto feeding and cutting device               1set

1.4.6 Pneumatic control system                                 1set

2. Paper corner applicator                                  

The applicator can sense the position of the pallet, and then adjust the position of the installation. 

The working center should be same as the wrapper.

Paper corner dimension: W50mm×thickness5mm;

Paper corner height: ≤900mm;

Angle: 90±1°;

Paper corner magazine capacity: 40pcs/magazine;

Quantity of paper corner magazine: 2;

3 Automatic ring wrapper                                         1set

Specification

Rotating ring inner diameter	1800mm
Wrapping dimension	Width: 1200mm; Height: 1000mm; Length: 1,800-18,000mm
Rotating ring speed	Max. 30rpm
Compressed air pressure	0.5Mpa
Air consumption	10L/M
Motor power	rotating ring: 2.2kw  380V, 60HZ, 3phase

Wrapper main frame with rotating ring                          

Rotating ring inner diameter: 1800mm;

Film carriage                                                 

Mechanical stretch film carriage

Film roll width: 500mm; 

Automatically cut and weld film after wrapping  

Pneumatic components: Festo brand

Control System                                                 

PLC electric control system, touch screen pane

 

4 Motorised Chain conveyor(to be decided according to pallet)      

Designed according to product base frame and floor plan

Conveyor can be designed with hydraulic lift, trolley or scale modular

5 Electrical control system                                 1set 

PLC control system, the wrapping layers, the wrapping cycles, and the time of top wrapping.  

6 Safety fencing with light curtain                    1sets

Fencing height: 2000mm.