Due to two working station, this Automatic stator winding machine can  wind two stators at the same time. Fixtures are in cycle operation automatically. It is No need to assemble fixture on the stator.It is benefit for the on-line operation.And the stator winding machine is used for  different types of stators.

(1) Function:

1. Cast iron or steel frame can absorb the shock. Accuracy is stable. The maximum winding speed is up to 450RPM (according to the wire diameter).

2. All the actions are fully automatic (including loading and unloading). The winding could be more stable and efficient.

3. The cutting part structure is in compact.Wire clamping and cutting is finished at the same time.

4. Easily to change the fixture for different types of stators.

5. Fixtures are in cycle operation automatically.It is benefit for the on-line operation.

6. Permanent magnet tensioning device enables the tension adjustment.

7. Travel and swing angle is adjusted within 150-220mm (mechanical adjustment).It could adapt to different requirement of different stator models.

8. Two working stations.

(2) Parameter:

Stator O.D	50~90mm
Wire diameter	0.25~0.8mm
Stator stack length	20~45mmm(standard);30~60mm(lengthen)
Stator I.D	30~50mm
Slot number	2 poles
Air pressure	0.4~0.7MPa
Lubrication mode	Continuous lubrication oiling machine
Voltage	AC380V,50/60Hz
Weight	1800Kgs
Dimension	2100*1250*1830mm

(3)Information needed for Automatic Stator Coil Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.

(4) Operator step

1. Power on the machine

2. Thread wire this this motor

3. Set the winding parameter in the CNC

4. Fix the wire to the tooling

5. Press the "start" button, close the safty door

6. Machine will do winding process automatically

7. After finishing the winding, machine will stop

8. take out the wire from the tooling.