Specifications 1.Color of your need

2.Have a good sealing

3.Evironmentally adhesive

4.two compoent adhesive

5.Attend auto exhibition

?

Two-component polyurethane?tackifier handwork, component proportion ratio is 100:40
?	Material-A	Material-B
Weight	Small barrel :25KG	10KG
	Big barrel :50KG	20KG
Physical nature	orange-red viscous liquid color based on your request to configure	brown-yellow liquid
viscosity	800-1000MPa.S(25°C)	25-50MPa.S(25°C)
density	1.02g/ml	1.02g/ml
package	Plastic bucket or Tin bucket	Plastic bucket ,Tin bucket, Plastic pots
storage	1. Material-A and material-B can store up 3-6 months.
	2. To appropriate indoor storage above 15°C

?Usage: 1.Before using,Part A must stir to mix well with electric hand/portable drill, part-B shake well. 2.Wipping the mould with release agent. 3.Add the water into part-A and 3-6 grams of water per kilogram. About water added,according to the local environmental, such as the humidity in the air,workshop working environment. 4.Part-A and part-B are mixed at the mixture ratio of 100:40, then add 40% talcum powder,with 2800 rev/min blender/agitator to mix, mixing time determined to the amount of the adhesive,every 200 grams adhesive mixing 10s. 5.Pouring the mixed adhesive into the mould, then insert paper core and give a little pressure on it. 8-10 minutes can demould. ?? attentions: 1.the products are generally stored in a dry room, and pay attention to water, moisture and sun. Must cover the plug and cover, to avoid absorbing rubber moisture in the air, affect the results. 2.material-A or material-B could be used in the normal temperature of (25°C), it will have an bad effect on the usage if the temperature was too high or too low. must be lower down or rise the temperature by manpower 3. Brushing the Mold release agent before pouring the glue into the model, keeping dry then pouring. ? ?