Product

Waterproof electromagnetic lock

Lock Dimension

228*52*28(mm)

Certification

CE RoHS FCC

Operating Voltage

DC12V

Holding Force

300KG

Operating Current

450mA

Weight

2.47KG

Suitable Humidity

0-90%(non-condensing)

Lock Finish

Chrome plating

Cover Finish

Drawing oxidation

Safety Type

Fail Safe

Suitable

Wooden door, Glass door, Metal door, Sliding door.

High level EM lock

Middle level EM lock

Item

HLEM400series

HLEM600series

HLEM660series

HLEM1100series

MLEM400series

MLEM600series

MLEM660series

MLEM1100series

Material

Pure ironDT4C

Top grade silicon sheet

Coil

100%copper

60%copper

40%Aluminum

Finish

Top grade polished chrome

Zinc plating-blue white

Troubles

Cause

Shooting

Door cannot lock

1. Circuitry malfunction or low voltage.

2. The power supply wire is too thin and long to cause big decrease of voltage.

3. Power supply is broken to cause no voltage output.

4. The positive and negative wire of power supply is connected in reverse.

5. The electromagnetic lock no power input.

1. Check the connection, and measure the voltage to see if it is normal.

2. Modify or change the power supply wire into thicker one.

3. Check the power polarity and correct the connection.

4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly.

No transform of indicator output with low holding force.

1. The mount plate and the electromagnetic lock face not in complete close.

2. The mount plate is fixed to tight, no room to move.

3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved.

4. The surface of mount plate or electromagnetic lock is not clear.

5. The power supply with lower power.

6. The power supply wire is too thin and long.

7. The electromagnetic lock is malfunction.

?

1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate.

2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable.

3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely.

4. Clean the surface of lock and plate, if rusted to cause no working please change the part.

5. Use millimeter to check the voltage and current of electromagnetic lock to see if it is normal, or need repairing or changing power supply.

6. Change into high quality power supply wire, better no more the 20 meters.

7. Repair or change the electromagnetic lock.

Door cannot open

The power is not cut off

To check out the connection of power supply and controller, the electromagnetic lock is power-on locking power-off opening type. The lock can be open once power off.