? ? ? Introduction

? ? ? Plastic products with a diameter of less than 20mm, such as pen holders, cosmetic pencils, and lipstick tubes, can use semi-automatic hot stamping machine and heat transfer machine , or full automatic hot stamping machine and automatic heat transfer machine. Most users will use automatic hot stamping machine and automatic heat transfer machine to decorate their products.

? ? There are various structures of automatic hot stamping machine and automatic thermal transfer machine on the market, among which the hot foil stamping machines with vertical turntable are mostly, because the vertical turntable can transport products continuously, which is more efficient. It uses a feeding trough to store products, and then the products are arranged in a certain order and transported to the hot stamping position. Some products need to be adjusted in direction, and an automatic U-turn device can also be installed. The product is conveyed to the hot stamping station or heat transfer station. Hot stamping generally uses hot stamping foil and anodized aluminum, and thermal transfer machine generally uses thermal transfer film. Products that have completed hot stamping and thermal transfer printing will continue to run to the unloading position.
? ? The automatic bronzing machine and heat transfer machine for pen holder, makeup pen, lipstick tube are small-sized machine types, in fact, it is a miniature automatic hot stamping machine and heat transfer machine specially designed for small diameter products in order to reduce costs machine, if your product diameter is larger, then you need a bigger machine, but they are similar in structure and have the same function.

Application-printed Samples

?

Details/structure:

• ? ? ? The hopper

? ? ? ? ? Used to store wooden pencils ready for thermal transfer. The hopper's width is adjustable to accommodate pencils of varying lengths. The feed rack consists of front and rear side panels, spaced the same length as the pencil itself. A pencil drop slot is located between the side panels, accommodating multiple pencils. The base is tilted downward toward the drop slot, allowing pencils to roll down easily. The notch at the bottom of the drop slot serves as the pencil outlet, where a push plate is located and driven by a drive mechanism.

• The loading rod

? ? ? ?The loading rod is a push rod mounted on a crank mechanism that pushes the pencil onto the fixture.

• The thermal transfer mechanism

• The thermal transfer film transport and winding mechanism

Description

Technical Parameter︰

1.Object Diameter:φ6~φ20 mm?? 2.Object Length:55~160 mm?? 3.Printing Storke: 20~80 mm?? 4. Printing Speed: 3000 pcs/hr ?

5. Power: 220V 50/60Hz 5.5kw?? Feeding motor:25W;?? Mainly Motor:375W;?? Roller Motor: 60W;?? 6.Weight: ≈550kg?? 7.Roller size: D125×150mm?? 8. Heater Wattage: 1KW.

Production Advantage?