Pine Nut processing machine Pine cone thresher

Pine?nut?sheller Pine nut cracker machine

Our company has professional and mature production experience of pine nut processing line. It is?suitable for large, medium and small processing plants.

Pine nut processing steps:
1.Pine cone thresher-- 2.Removal of impurities-- 3.Size classification-- 4.Pine nut sheller-- 5.Shell and kernel separation-- 6.Drying-- 7.Peeling-- 8.Baking (or other deep processing)

?

Introduction of Pine?Nut sheller machine?

This Good Performance Dehulling Pakistan Pine Nut Shelling Machine Sunflower Seed Peeling Machine can process the pumpkin seeds, watermelon seed, Melon seeds and hanging gourd seeds and other seeds that can be shelled.
1. Wet shelling
2. By shelling machine improvements on the original, so that more efficient and less shelling nuts crushing rate.
3. Application circulating shelling, shelling grain that is not automatically enter the next cycle shelling;
4. In the collection and processing of leather, sorting substituted by vibrating vacuum blow skin, reducing the dust generated.
5. Increase the sorting screen process and screening area, so Jen sufficiently screened to reduce Jen returns caused by shelling machine broken,
6. By replacing the sorting sieve section, processing different specifications white pumpkin.
7.Compact structure, low loss, easy operation and maintenance, etc.

?

Brazil/Pakistan/Lebanon/Afghanistan Pine Nuts Production Line

Parameter of?Pakistan's Pine nut procesing machine

Parameter?of Pine Nut sheller machine

?

Introduction of Pine Cone thresher machine

? ? The pine cone enters between the roller and the concave plate through the hopper, and under the action of the round nail teeth, the impact and the friction are generated between the loose tower and the concave plate, so that the seeds fall off.At the same time, under the action of guide nail teeth, the material is pushed to the outlet end from the end of the feed port.And the grains and the small pieces of impurities are separated by the concave plate holes and fall to the upper surface of the sieve.A small fraction of the unseparated grains enter into the mandrel separation screen from the feed outlet at the end of the drum and are separated again.A mixture of grains and sundries that fall on the sieve,by the reciprocating movement of the sieve to the bottom of the suction duct,small debris falls to the ground in the course of transportation.When the sieve passes through the bottom of the suction duct, the lighter debris is discharged from the air outlet under the action of negative wind pressure at the air suction channel, and the grain after screening and air selection is sent out from the grain outlet.

Parameter?of Pine Cone sheller machine

Pine nut red skin peeling machine

Vacuum packing machine

?